Clearlight Audio RDC 1.2 Isolation Cones (Set of 4) Unthreaded - NEW OLD STOCK
- Large cone measuring 40mm in diameter and 37mm tall, load capacity 25kg per cone.
- Available Unthreaded
The Clearlight Audio RDC 1.2 is ideally suited for the replacement of spikes on floor-standing loudspeakers and are available unthreaded or with a choice of 6mm or 8mm threaded inserts
On solid floors the RDC 1.2 cone helps to isolate the loudspeaker cabinet from its environment, giving a clearer, more natural tone to vocals and a tighter control of bass.
Even on carpeted floors the nature of the RDC material reduces the effects of cabinet resonance, even if the cone does not penetrate through to the solid floor below.
This can be superior to spikes where cabinet resonance is transmitted down through the spike to the solid floor, where it is then reflected back up through the spike and back into the loudspeaker cabinet causing colouration. RDC Cone Cups can be used to reduce the risk of cones slipping on solid floors, whilst at the same time improving the level of decoupling of the loudspeaker from its environment.
On wooden floors the RDC 1.2 cone offers protection from damage, whilst at the same time reducing the effect of resonance transmitted into the floor. This is especially useful on suspended floors, where excessive bass can be transmitted to the room below.
This can be reduced further with the use of RDC Cone Cups and Combi-Bases.
The Clearlight Audio RDC 1.2 is also perfect for replacing spikes on the bottom of loudspeaker stands using threaded cones
